Saturday, November 26, 2016

Memory Foam Dog Bed for Crate

These dogs keep us busy and need a cozy spot to rest! We recently got a new memory foam mattress topper so decided to recycle the old one into new dog beds for their crates.


I used plywood, no rip utility fabric, fleece, memory foam, and a staple gun for this project.


 Measure the crate and cut the board, foam, and fabric to fit.
 Staple down the no rip fabric tightly to the board. This will hold the foam to the board.
 I cut a fleece blanket in half to cover two boards for both crates and stapled that down to finish it off. I didn't bother making the underside pretty because no one will see it (besides you, haha). 
She loves it already!
If you don't quite trust your dog in the crate if they aren't potty trained you could use waterproof fabric underneath and make the fleece similar to a pillowcase slip so it could be washed. 

Thursday, November 24, 2016

A Very Merry DIY Christmas: Hand Lettered Wood Signs

Hello and welcome to part three of my Christmas gift series! Of course these wood signs are fabulous for gifting for any occasion or holiday. I love that they can be used year-round. I got the wood from the Home Depot and they cut it there for me. These boards are approximately 12"x15". To see how we stained the wood, check out my last tutorial here

If you love the look of hand lettered signs but don't have the time or patience to create your own look, shop them on Brooke Gordon Designs

This first design is for my Hawaii family 🤗





I used basic acrylic paint and this brush set to tackle this project:
I used the flat brush for the thick strokes and finished with the rounded tip for thin lines and rounded edges. 

A Very Merry DIY Christmas: Fabric Cross Wood Sign

Welcome back to part two of my Christmas gift series! This beautiful (and easy!) fabric cross is a great piece for gifting. It is relatively inexpensive and thoughtful and you can put your stamp on it, or theirs, to personalize it. Here is what you'll need to complete this DIY: wood, stain, fabric, hot glue, fray-check, ribbon, and nails. A huge thanks to Brooke from Brooke Gordon Designs for helping me with the process! You can check our her wood signs on Etsy.

Check out the time-lapse and then keep scrolling to see the step-by-step pictures!



 The wood boards are 8 inches by 13 inches.
 The stain is called "espresso."
Wipe the excess stain off of the wood. Wear gloves, seriously!
 Let dry at least 24 hours
I purchased the fabric, fray-check, and iron on hem from Michael's.
 Cut two strips for the cross. The vertical strip should 
be slightly wider than the horizontal strip.
 Use iron-on hem to secure the ends of the fabric. 
Apply fray-check to the sides of the fabric.
Hot glue the fabric down (in place) to secure it to the wood.
 Looking good! Almost done!
 Use ribbon to cinch the center of the fabric.
Cut the ends of the ribbon and flip the knot under the fabric. I used a dab of hot glue to secure it down. Lastly, I used nails to secure the fabric to the edges of the wood board.



Monday, November 14, 2016

About Me

My name is Emma and I am a marketing graduate student. I started this blog to keep track of my favorite recipes, projects, and DIY crafts. I love trying ideas and sharing my ideas with all of you. Seeing and growing this blog has been a love of mine for years now and I can only hope to continue providing my followers with creative and engaging content. Outside of work and school my dogs and fiance take up most of my time!

Photo Credit: Henson Creative

Thursday, November 10, 2016

A Very Merry DIY Christmas: Photo Ornaments

Logo Header Image
Welcome to part one of "A Very Merry DIY Christmas" gift series! My goal behind this series was to find inexpensive gifts that still show the receiver that you put time, thought, and effort into it. This is also a great option to add on to another gift, or even use it as a gift tag to identify presents under the tree. 



Here's what the project requires: 
-clear plastic disc ornaments
-photos
-thread/fishing wire
-printer paper
-ribbon
-decorative snow (optional)


My project started at a craft store where I purchased two medium/large clear plastic disc ornaments and three smaller ones. I used my local Walmart photo center to print 5 4x4 photo prints. You can always use photo prints you have around the house, too! 



Identify how much space you want your picture to take up in the ornament. I made mine approximately the size of the bulb to use most of the space. Trace out a circle and cut the same size for your picture and printer paper backing. I printed out the text for the backing to my ornaments but you can always hand-write anything in. Use sticky dots or a glue stick to secure the printer paper to backside of the photo (both right-side up!). 


Fonts (top): Bromello and DK Yellow Sunshine; Backtalk Sans BT
(bottom): Daydreamer; Bromello; Cheddar Jack
I used a needle to make a small hole in the top of the photo and used thread to attached the hook of the ornament. This step felt tedious but it's important because if you don't secure the photo to the top, your photo inside will shift and it could end up upside-down.


Threadplacing picture

Roll the photo up and place it into the bulb. Using photo paper allows it to roll easier than using cardstock. You may have to give it a little shake and tap to get the picture to open up flat. Good thing our bulbs are plastic, right?! If you would like to give your ornament a snow globe feel, add some artificial snow. This also gives it more of a festive holiday feel!



I really enjoyed using the pictures of my great grandparents. One set I knew as a child- even knowing my great pap into my young adult years- and the other set I never met. It's a nice way to connect family, past and present, around the holidays. A warm reminder that they are always here with us.




Let me know if you have questions about the project! Be sure to save this on Pinterest and I hope you check out part two of the series next week!

Friday, November 4, 2016

Spooktacular Halloween House Decor

Tired of the inflatable characters, plastic skeletons and skulls to decorate this Halloween? Try digging into your closet to create unique and frightfully fun decor! My Nonna created these creatures to decorate her front porch. Hope these help inspire your Halloween decor...